LDX-C1012 Polyurethane Primer

Item	Specification	Test Method
Container State	No hard sediment, homogeneous after stirring	Visual inspection
Film Appearance	Smooth film	GB/T 1721-2008
Fineness, μm	≤40	GB/T 6753.1-2007
Flexibility, mm	≤2	GB/T 1731-93
Adhesion (cross-hatch method), grade	≤1	GB/T 1720-89
Impact Resistance, kg.cm	≥50	GB/T 1732-93
Nitrobasing Resistance	No bleeding or discoloration	GB/T 25271-2010
Salt Spray Resistance	240 hours, no abnormalities	GB/T 1771-2007
Saltwater Resistance	168 hours, no abnormalities	GB/T 1763-89

• Application Methods: High-pressure airless spray, air spray, brushing, and rolling.
• Thinner: X-10 thinner
• Drying Time at 23°C:
  • Surface dry: 1 hour
  • Fully dry: 24 hours
  • Complete cure: 7 days

Temperature	5°C	20°C	30°C
Short interval	48 hours	24 hours	16 hours
Long interval	7 days	7 days	7 days

Recommended Coating System:
Two coats, dry film thickness 40-50 microns.
Top coat options: Acrylic polyurethane paint, single-component acrylic resin topcoat, etc.

Surface Preparation:

• Steel with oxide scale: Hand or power brush to St2 grade.
• Clean steel without oxide scale: Hand or power brush to St2 grade.
• Steel with factory primer: Hand or power brush to St2 grade.
• For welded or fire-damaged areas: Remove slag, smooth, and brush to St2 grade.
• For old paint substrates: Remove loose or failed sections using air or power brushing to St2 grade.
• If the previous layer of paint is dry, sand the surface and remove contaminants before applying the next layer.

Application Details:

• Spray Method: Airless spraying
• Thinner: X-10, dilution ratio: 0-5% by weight
• Nozzle Size: 0.4-0.5mm, spray pressure: 14-15MPa
• Air Spray: Thinner: X-10, dilution ratio: 15-30% by weight
• Nozzle Size: 2.0-3.0mm, spray pressure: 0.3-0.6MPa
• Cleaning Agent: X-10 thinner

Store in a cool, dry, and well-ventilated indoor warehouse.
Shelf life: 12 months. Product beyond the shelf life can still be used after passing inspection.

Precautions:

• Mix according to the required ratio. Stir well and let cure for 10-15 minutes before use. For temperatures below 25°C, extend curing time as necessary.
• Ensure tools are dry and clean. Clean the surface before coating to remove moisture, acids, bases, dust, etc. Avoid exposure to water, acids, bases, alcohol, or other contaminants during the mixing and application process.
• After mixing, seal unused hardener tightly to prevent moisture absorption.
• During application and curing, relative humidity should not exceed 75%.
• If the first coat exceeds the recoat interval, sand the surface before applying the second coat.

Environmental and Safety Notes:

• This product is flammable. Ensure proper ventilation during application. Use appropriate protective equipment to avoid skin and eye contact. If skin contact occurs, wash with soap or suitable industrial cleaners and water.
• Avoid inhaling spray mist. Follow local environmental regulations for disposal of waste paint and containers.

Disclaimer:
The information provided is based on our experimental data and practical construction experience. While we strive to ensure all advice is correct, conditions such as substrate quality and environmental factors are beyond our control. Therefore, written consent is required before use. The company is not liable for any losses caused by use without our knowledge. Information may be updated based on practical experience and product development.

Note: Please read the instructions carefully before use or consult a professional for guidance.

1. Market Demand Analysis

• Latin America: Latin America is seeing a growth in demand for construction, energy, and infrastructure. With the economic recovery and urbanization, there is a significant increase in the need for corrosion protection for steel, pipelines, and other infrastructure, especially in countries like Brazil, Mexico, and Argentina, where the steel and construction industries are developed. The excellent corrosion resistance of LDX-C1012 polyurethane primer makes it highly attractive in these markets.
• Arab Countries: In the Middle East, particularly in Saudi Arabia, the UAE, and Qatar, with the continued growth of the oil and gas industry and the expansion of infrastructure projects, there is a growing need for highly durable corrosion-resistant coatings. The region’s demand for corrosion protection for steel, steel structures, and pipelines is high, which makes LDX-C1012 a promising product.
• Africa: African countries, particularly South Africa, Nigeria, and Kenya, are experiencing rapid growth in infrastructure development, with large-scale projects in the steel, chemical, and energy sectors. LDX-C1012’s chemical resistance and salt spray resistance are highly beneficial in meeting the unique demands of these projects, offering significant market potential.

2. Market Potential

• Demand Growth: With the acceleration of infrastructure development, LDX-C1012’s resistance to chemicals and corrosion will have widespread applications in Latin America, Arab countries, and Africa, especially in steel mills, steel structures, and pipelines. The product’s salt spray resistance and corrosion protection will be in high demand in regions with marine climates or high salt exposure.
• Technological Promotion: As many countries strengthen environmental protection and quality control in the construction industry, there is an emerging space for high-quality and eco-friendly coatings such as LDX-C1012.

3. Requirements for Distributors

• Technical and Product Training Capability: Distributors should have the capacity to provide technical support and professional guidance to local customers on the use and application of coatings.
• Logistics and Distribution Network: Distributors need to establish a reliable logistics and distribution network to ensure that products are delivered promptly to major markets. Bulk coatings rely heavily on efficient delivery and inventory management.
• Local Market Knowledge: A deep understanding of local demands and regulations in industries like construction, energy, and chemicals is essential to identify potential customers.
• Sales and Marketing Ability: Distributors should have strong market development and customer management capabilities to effectively promote the product and offer long-term technical support.
• Compliance with Environmental Regulations: In particular, distributors in Arab and Latin American markets must ensure that products meet local environmental and safety standards.

4. Target Customers

• Construction Companies and Contractors: Especially those involved in steel structures, infrastructure construction, and industrial projects, these companies need high-performance coatings to ensure long-term corrosion protection for buildings, pipelines, and steel structures.
• Steel Mills and Heavy Industry: Steel manufacturing, heavy machinery, and pipeline manufacturers have a strong demand for corrosion-resistant coatings, particularly in harsh, corrosive environments.
• Energy Companies: Particularly in the oil, natural gas, wind, and solar energy sectors, energy companies working in challenging environments require coatings that provide high protection for their equipment and infrastructure.
• Government and Infrastructure Projects: Governments in the Middle East and Africa are investing heavily in large-scale infrastructure projects (such as ports, roads, and railways), which create a significant customer base for coating products.

5. Business Opportunities

• Project Partnerships: Establishing long-term partnerships with local construction companies, large contractors, and steel mills can ensure a steady demand for the product.
• Green Building Projects: With the rise of demand for eco-friendly construction materials, LDX-C1012, with its environmentally friendly and durable features, is well-positioned to supply coatings for green building projects.
• Government Procurement: By targeting government tenders and large infrastructure projects, distributors can participate in large-scale contracts and offer high-quality coating solutions.

Conclusion and Recommendations

• Significant Market Potential: Especially in infrastructure development, energy, and steel industries. Latin America, Arab countries, and Africa have a high demand for high-performance coatings with corrosion and weather resistance, making LDX-C1012 highly competitive.
• Distributors should have technical support capabilities, logistics channels, and market sales abilities, as well as a deep understanding of local construction, chemical, and energy markets.
• Target customers should focus on construction companies, energy companies, steel mills, and government infrastructure projects, all of which have a strong demand for high-performance coatings.