NDL-31003 Nano Super Heat Reflective Insulation Coating
Product Description:
Based on nano-composite prefabrication technology, NDL-31003 is meticulously crafted using network-state inorganic polymer, nano-optical microparticles, and nano-scale hollow glass microspheres. The coating demonstrates superior solar reflectance performance, covering nearly the entire visible light, ultraviolet, and infrared wavelength ranges (0.35-1μm). It has an average reflectance of >90%, reaching up to 96%, and a hemispherical reflectance greater than 87%. This results in surface temperature reductions of up to 28°C and internal temperature reductions of 8-15°C, effectively preventing solar heat from accumulating on the coating surface, providing high-efficiency sun protection and insulation.
Thermal Insulation Mechanism: The coating works through multiple insulation mechanisms, including reflection, blockage, radiation, and shielding, to prevent solar heat from accumulating on the coating surface, with minimal heat transferred inside. The heat insulation effects of the coating are significant.
- Reflective Insulation: Utilizes nano-optical microparticles as the primary reflective material, providing efficient solar reflectance within the 0.35-1μm wavelength range, preventing solar heat from accumulating on the coating surface.
- Blocking Insulation: Employs nano-scale ultra-fine hollow glass microspheres as insulation material, forming a dense vacuum network 3D structure with ultra-low thermal conductivity, effectively preventing heat convection and transfer.
- Radiative Insulation: Uses infrared emissive powder as the radiative heat material, emitting absorbed solar heat as infrared radiation, achieving good cooling effects.
- Shielding Insulation: Utilizes carbides as heat shielding materials, forming overlapping heat shielding layers on the coating surface to block infrared radiation and insulate heat.
Performance Advantages:
- Average reflectance >90%, hemispherical reflectance >87%, ultra-low thermal conductivity (<0.035 W/m.K), superior radiative and shielding insulation, excellent adhesion, thin coating, light load, high abrasion resistance, easy to apply, suitable for complex structures, water-based and environmentally friendly, easily repairable if damaged.
- The coating is corrosion-resistant, waterproof, moisture-proof, has excellent insulation properties, high surface tension, good extensibility, high weather resistance, does not peel or flake, and has a long service life.
Typical Uses: Specially designed for use in factories, buildings, drying rooms, machine casings, valves, containers, storage facilities, bunkers, ships, vehicles, yachts, pipelines, military equipment, special vehicles, steel structures, casings, tanks, warehouses, electrical equipment, telecommunication equipment, and more for thermal insulation, maintaining constant temperatures, reducing energy consumption, and extending equipment life.
Suitable Substrates: Can be applied to various steel structures, non-ferrous metals, concrete, ceramics, fibers, glass, wood, plastic, PVC, existing coatings, and other surfaces for professional long-lasting thermal insulation, energy saving, and temperature regulation.
Practical Information:
- Color: White (other colors available upon consultation)
- Gloss: Matte
- Volume Solids: >80%
- Temperature Range: <100℃
- Thermal Resistance: 25 ㎡.k.w
- Density: 1.2g/cm³
- Hardness: >5H (Mohs)
- Mold Resistance: Grade 1
- Water Resistance: Waterproof, moisture-proof
- Adhesion: Grade 1
- Bond Strength: 8Mpa
- Compressive Strength: ≤10Mpa
- Aging Resistance: UV, hot air, and humid heat aging test >2000h, no change
- Salt Spray Test: 5% NaCl solution, >2000h, no change
- Typical Thickness: 0.25-0.35mm (10-14 mil) dry film equivalent to 0.3-0.4 microns (12-16 mil) wet film
- Theoretical Coverage: 1 ㎡/L, 1mm D.F.T
- Actual Coverage: Allows a suitable loss factor (0.05-0.12)
- Application Method: Spray, brush, roller
- Drying Time: Refer to the table below for specific details
- Temperature: Surface Dry Hard Dry Max Min
- 25°C (77°F): >45 minutes >48 hours N/A N/A
Regulatory Data:
- Environmental: Non-toxic, odorless
- Flash Point: None
- VOC: 0
Surface Preparation:
- All surfaces to be coated should be clean, dry, and free from dust, oil, rust, or other contaminants. Ensure no moisture and apply in a dry state.
- For good metal roofing and colored steel surfaces, high-pressure water cleaning is recommended to remove dust, grease, and other impurities that affect adhesion, and apply in a dry state. Roughen the surface to a 35-70μm range to ensure proper adhesion.
- For concrete surfaces, remove dust, sand, loose areas, and other contaminants, then wash with clean water and apply after drying.
Usage Instructions:
- Application Process: Follow the recommended procedures in the "Coating Application Guide."
- Mix Ratio: Single/dual-component based on the purchased product, refer to the "Coating Application Guide" for details.
- Application Method: Spray (high-pressure spray), brush, roller.
- Thinning (if necessary): Usually not required, refer to accompanying instructions if needed, and do not exceed the allowed range.
- Cleaning: Clean equipment and protective clothing promptly with water or thinner after use or during breaks to prevent clogging.
Precautions:
- Avoid prolonged exposure to sunlight or large-scale air exposure. Always keep the product sealed to prevent solvent evaporation and surface skinning, which could affect the application and coating performance.
- Ensure substrate temperature is at least 3°C above the dew point. In enclosed spaces, ensure adequate ventilation.
- Coating curing is affected by temperature, humidity, and film thickness. Typically, a thin film of 125 microns (5 mil) will fully cure within one day at 25°C (77°F) and 65% relative humidity. Adjust the application environment to improve efficiency.
- Pre-coat complex areas such as cut edges, welds, corners, and bolt heads to avoid uneven or missed coatings.
- Do not use the coating until fully cured to achieve optimal performance.
- Measure the dry film thickness after full curing to ensure proper coverage and quality.
Safety Instructions:
- This product is for professional use only, following guidelines provided in the product manual, application guide, and other materials provided by the company.
- All activities involving this product should comply with relevant national, health, safety, and environmental standards and regulations.
- For any doubts about product suitability, consult the company for further advice.
Packaging Specifications:
- Standard Barrel (Top Diameter: Φ300mm, Bottom Diameter: Φ275mm, Height: 360mm), 15kg/barrel, 20kg/barrel, other packaging specifications available upon request.
Storage:
- Store in a dry, cool, ventilated environment away from heat sources and flames. Shelf life is 12 months at 23°C±2.
Market Opportunity and Potential:
Market Opportunity and Potential for NDL-31003 in Latin America, Arab Countries, and Africa
Market Opportunity and Potential:
-
Climate Suitability:
- Latin America, Arab Countries, and Africa experience high temperatures and intense sunlight. NDL-31003, with its superior solar reflectance and insulation properties, addresses the need for reducing heat accumulation and energy costs associated with cooling buildings and structures.
-
Energy Efficiency:
- These regions are increasingly focusing on energy efficiency and sustainability. The high reflectance and insulation properties of NDL-31003 can significantly reduce energy consumption in cooling systems, aligning with local government initiatives and international sustainability goals.
-
Infrastructure Development:
- Rapid infrastructure development in these regions creates a demand for advanced construction materials. NDL-31003 can be marketed as a premium solution for enhancing the longevity and efficiency of buildings, warehouses, industrial facilities, and more.
-
Diverse Applications:
- The coating’s versatility allows it to be used on various substrates such as metal, concrete, plastic, and existing coatings, making it suitable for a wide range of applications including industrial facilities, residential buildings, and commercial properties.
-
Environmental Regulations:
- Growing environmental awareness and regulations in these regions encourage the use of eco-friendly materials. NDL-31003’s non-toxic, VOC-free formulation makes it an attractive choice for meeting these regulatory standards.
Recommended Resources and Conditions for Distributors:
-
Technical Expertise:
- Distributors should have a basic understanding of advanced coating technologies and the ability to educate potential customers on the benefits and application methods of NDL-31003.
-
Sales and Marketing Network:
- A strong sales and marketing network to effectively promote the product’s unique features to architects, builders, construction companies, and government bodies involved in infrastructure projects.
-
Logistics and Storage:
- Adequate logistics and storage facilities to ensure the product is maintained in optimal conditions, preserving its quality and effectiveness.
-
Training and Support:
- Capability to provide training and support to end-users on the correct application and maintenance of the coating to maximize its performance and benefits.
-
Regulatory Compliance:
- Familiarity with local regulations and standards to ensure the product meets all necessary requirements for import, sale, and use in these markets.
Target Customers:
-
Construction Companies:
- Firms involved in building residential, commercial, and industrial properties that can benefit from energy-efficient and durable coatings.
-
Government and Municipal Bodies:
- Agencies responsible for public infrastructure projects, including schools, hospitals, and government buildings, that require sustainable building solutions.
-
Industrial Facilities:
- Operators of warehouses, factories, and storage facilities looking to reduce cooling costs and enhance the lifespan of their buildings.
-
Architects and Designers:
- Professionals seeking advanced materials that offer both aesthetic appeal and functional benefits for their projects.
-
Real Estate Developers:
- Developers interested in promoting their projects as sustainable and energy-efficient, thereby attracting environmentally-conscious buyers and tenants.
By leveraging the unique benefits and versatility of NDL-31003, distributors in Latin America, Arab countries, and Africa can tap into a growing market for sustainable, high-performance building materials, ultimately driving the adoption of this innovative product in diverse applications.
-
